I have an SLT30 S/N 46603d30394
Back up beeper doesn't work, chased wires from beeper, power wire goes into a connector with other wires, on the other side of connector where beeper wire goes, there is nothing, no wire, no pin. Can't find a loose hanging wire or anything and custy says hasnt' worked in at least 3 years...so question is where is the power wire come from if i'm gonna try to rerun it is off the direction switch? any help is appreciated!
Thanks Dudes and Dudettes
Showing items 1 - 4 of 4 results.
Thanks for the info and help, goin to look at machine this morning, hopefully all goes well, wiring is the bane of my existence , rather be turning a wrench haha
I am not sure on that model. We have a diagram in our inventory. That is how I found the connections. I would think they would be under the cover just under the seat deck.
Ok cool, so it's the power wire which is 26 labeled on wire, where are fuses on machine? Seems like a dead brain question but would rather know before i went to look at machine keep labour times down and economy good! haha
Factory install added a second reverse switch. This switch is fed Negative from the #8 terminal on the controller which is the reverse input from the directional switch. Positive is directly connected through fuse #7.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.