BOLZONI-AURAMO has always been market leader in the field of the hook-on sideshifters, accepted and fitted not only by forklift dealers but approved and fitted as original equipment by many OEMs.

Traditionally, sideshifters produced by Bolzoni-Auramo have had a very positive response from market due to the care put into combining excellent engineering, simplicity of installation and rugged construction.

The new Model HN shows significant improvements over its predecessors:
* VISIBILITY is improved by 21% and represents a benchmark in the field;
* Care has been devoted to designing the UPPER BAR which integrates the mobile upper hook and the fork carriage bar in one single piece;

This very compact design allows:
* 9% lower weight than the previous model;
* extremely robust construction;
* Lost load and centre of gravity equivalent to the previous model;
* UPPER SLIDING PADS with increased thickness for longer life. This feature is enhanced by the fact that the pads slide on a polished surface, and by the presence of greasers. The pads are completely protected from water and dirt;
* The LOWER PADS are also thicker and equipped with greasers;
* The new adjustable lower hooks have an innovative design to allow safe and easy fitting;
* The hook has a slot to allow vertical adjustment to compensate pad wear and is coupled to the sideshifter frame on a "sloped" surface which keeps it in the fixed position;
* Installation is made even easier thanks to the handling hook fixed to the upper bar;
* The CYLINDER, with double rod, allows an equal sideshifting speed in both directions. It can be completely disassembled for easy maintenance at low cost.

For further information, contact Annalisa Castellini on +39-0523-5555-11, via e-mail on info@bolzoni-auramo.com, or see www.bolzoni-auramo.com.