7 things you should know about reach truck training

Nick Welch -
Safety First
- 14 Jun 2018 ( #876 )
3 min read
Nick Welch
Nick Welch
Nick Welch is Senior Technical Development Executive for RTITB, the largest forklift training accrediting body in the UK and Ireland, recognised by the HSE, HSA and HSENI.
Although specific training is required for reach truck operators, in some operations, the particular risks and challenges of reach trucks may be misunderstood and overlooked. Often operators and supervisors assume that they're the same or similar.
Here are seven essential reach truck training considerations for employers.

1. Different Truck Categories
Reach trucks come in various categories, so different skills and training are required for safe and efficient operation. Many employers mistakenly think that operators trained to operate one type of reach truck are automatically qualified to operate them all. However, operators must complete conversion training to gain the competence and qualifications to operate different truck categories, such as seated or standing truck categories, or truck categories with a greater lift height.

2. Working at Height
Racking systems in reach truck operations are different to those encountered by counterbalance forklift operators. With increased racking height comes increased risk so operators must receive training that equips them to operate safely at height, with accuracy, efficiency and an understanding of the specific risks posed by drive-through and drive-in racking systems.

Reach trucks come in various categories
Reach trucks come in various categories
3. Travelling on Inclines
Although it's not commonplace and should be avoided wherever possible, travelling on inclines can pose the biggest risk for reach truck operations. Operators must be trained accordingly on safe methods of negotiating an incline, with consideration of the drive and braking systems specific to reach trucks.
Correctly trained operators must be able to recognise the risks relating to negotiating inclines and demonstrate competence in negotiating inclines with a laden and unladen truck.

4. Assistive Technology
Assistive technologies such as cameras and LCD screens are increasingly common. Although this can be useful to enhance safety and efficiency, it should never take the place of the right reach truck training.
Devices designed to aid stacking and destacking should only be used to assist, and not relied upon. If the technology fails for some reason, the operator must be competent to operate safely without it.

5. Stability
The stability and centre of gravity of a reach truck differs to a counterbalance truck because they are designed to reach out towards the racking further than their stabilising legs.
To avoid a potentially fatal truck tip-over, operators must be trained to understand the truck's centre of gravity, load capacity, and the effects that load weight has on the truck when at height or with the reach extended.

6. Steering and Operating Position
Unlike a counterbalance truck, the load on a reach truck is positioned to the right of the operator. All-round observation is important and reach truck operators must be taught to look in the direction of travel, remaining aware of additional blind spots. These can be caused by the load, operating positions and overhead guard. When travelling with the forks leading, the mast also creates an additional blind spot.

7. Reach Mechanisms and Reach-Legs
In every movement and operation, the reach-legs and reach mechanism, whether a moveable mast, pantograph or telescopic, must be considered. Operators must understand how all these mechanisms function differently.
In addition, the varying types of reach mechanism suit different types of operation. This makes specific job training and familiarisation training crucial once basic training has been completed.
Also Read:
Right-sizing your forklift fleet: the hidden opportunity for operational excellence
Tom Ryder
3 minute read
Right-sizing your forklift fleet: the hidden opportunity for operational excellence Your Focus - 28 Aug 2025 (#1245) Tom Ryder is Chief Commercial Officer at TFS, an independent, national provider in the United States, of comprehensive, custom-engineered fleet management solutions for material handling equipment that improve safety, productivity and cost.
The shortage of skilled labor: a global challenge, a Brazilian opportunity
Reinaldo Moura
2 minute read
The shortage of skilled labor: a global challenge, a Brazilian opportunity Your Focus - 14 Aug 2025 (#1243) Reinaldo Moura is the founder of the IMAM (Institute of Material Movement and Storage) Institute, which was established to help with the flow of knowledge in the intralogistics sector throughout Brazil and Latin America.
AI in the supply chain: from fragile to intelligent
Diana Davoyan
2 minute read
AI in the supply chain: from fragile to intelligent Your Focus - 7 Aug 2025 (#1242) Diana Davoyan is a digital marketer in the global robotics sector based in Europe. Here she looks at how AI can help to build resilience in the logistics and supply chain.
For more unique stories and expert insights: read our industry blogs
Blog articles provide perspectives and opinions and therefore may contain inaccurate or incomplete information. Forkliftaction Media accepts no responsibility for errors or omissions. If you feel that significant facts are overlooked, or have a different viewpoint on a topic addressed, we invite you to open a conversation in our Discussion Forums.

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Inside The News
Next Thursday is R U OK? Day in Australia , an important opportunity to bring conversations about mental health out into the open and a reminder to check in on those around us, including our colleagues... Continue reading

PREMIUM business

Tailift Material Handling Taiwan Co.,Ltd.
Focused simply for the new era.
Upcoming industry events …
October 15-17, 2025 - Bangkok, Thailand
October 21, 2025 - Atlanta, GA, United States
November 13-14, 2025 - Berlin, Germany

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Inside The News
Next Thursday is R U OK? Day in Australia , an important opportunity to bring conversations about mental health out into the open and a reminder to check in on those around us, including our colleagues... Continue reading
Upcoming in the editorial calendar
MANAGING MIXED FLEETS
Oct 2025
ASSET FINANCE
Nov 2025
Upcoming industry events …
October 15-17, 2025 - Bangkok, Thailand
October 21, 2025 - Atlanta, GA, United States
November 13-14, 2025 - Berlin, Germany
Inside The News
Next Thursday is R U OK? Day in Australia , an important opportunity to bring conversations about mental health out into the open and a reminder to check in on those around us, including our colleagues... Continue reading