Discussion:
used transmisssion hazards

i was wondering if anyone knew of any regulations that are in place to protect the techs that rebuild transmissions. are there any disclosure laws? i work for a great company, but sometimes i think we should have to clean the outside of the transmission before we get it to teardown. dont get me wrong, we do clean the transmission, but at what cost to our health? we never know what we are dealing with, as most of our transmissions actually come from dealers.

any info would be appreciated
  • Posted 3 Oct 2007 08:57
  • Discussion started by darrell_h
  • Ohio, United States
Showing items 1 - 4 of 4 results.
ok, i see... i basically skimmed through it, there is a LOT of reading there... and you really have to pay attention...

thank you very much..
  • Posted 8 Oct 2007 08:33
  • Reply by darrell_h
  • Ohio, United States
darrell h:

OSHA 1910.1200 goes beyond just chemicals in containers. It addresses employee exposure to hazardous chemicals within the workplace.

OSHA 1910.1200 (b)(1): This section requires... all employers to provide information to their employees about the hazardous chemicals to which they are exposed, by means of a hazard communication program, labels and other forms of warning, material safety data sheets, and information and training....

OSHA 1910.1200 (b)(2): This section applies to any chemical which is known to be present in the workplace in such a manner that employees may be exposed under normal conditions of use or in a foreseeable emergency.

Google: OSHA 1910.1200 APP E for a summary of employer responsibilities.
  • Posted 7 Oct 2007 09:39
  • Reply by joseph_h
  • Michigan, United States
i did google this, but cant seem to find anything related to materials found outside of containers. we arent talking about spills either. i did however email OSHA, (did NOT report the company, im not trying to do that) and when they respond, i will post the response here. as a matter of fact, here is what i had emailed them.
____________________________________________________________________________________________
The company that i work for rebuilds industrial transmissions. these industrial transmissions are from heavy equipment, such as, construction equipment transmissions, off road lift truck transmissions, and transmissions from heavy equipment that is found in factories and warehouses.

i have looked through the site here, and most of what i find is for chemicals that come into the company in containers. we do use solvents, but i am sure that we are compliant with the OSHA laws regarding these substances. My question is more related as to my employers responsibility to protect me from what is found on the OUTSIDE of these transmissions. When we receive a transmission, it is either on a skid, or in a crate. these are used transmissions, and they usually come from a dealer. so where these transmissions originate is usually a mystery to us transmission techs that must clean the outside of the transmission before we can disassemble it.

these are usually covered in grease or oil. which is easy to protect ourselves from. however, sometimes there are curious chemicals on the outside of the transmission. odd smells. solids that produce a lot of dust. i have suggested to my company that we should have a sealed booth, with a pressure washer of sorts to clean off the transmissions. i have experienced dizzyness, shortness of breath, and burning sensations in my lungs. the answer to this complaint to my boss is that those are things that happen when you dont know what you are cleaning off of a transmission.

so what are my employers responsibilities to protect me from this material that can be found on the outside of these transmissions? it is currently almost impossible to know where a transmission originated. we do international business. agriculture. construction. and factories. so i think that i *could* have a moderate risk of being exposed to pesticide, fertilizers, and random hazardous and or toxic chemicals. how do i evaluate my risk level? or is this the responsibility of my employer?
  • Posted 7 Oct 2007 00:45
  • Reply by darrell_h
  • Ohio, United States
darrell_h:

Your subject matter is addressed in OSHA 1910.1200, Hazard Communication.

For more information, Google: OSHA 1910.1200.

You can also Google: SAFETY AND HEALTH TOPICS: HAZARD COMMUNICATION.

Occupational Safety and Health in Ohio is regulated by the U.S. Department of Labor, Occupational Safety and Health Administration (OSHA).
  • Posted 6 Oct 2007 12:25
  • Reply by joseph_h
  • Michigan, United States

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Movers & Shakers
Linda Häkkilä Linda Häkkilä
vice president, Investor Relations, Konecranes
vice president operations, Elokon Group
President, EP Equipment Europe
Senior vice president human resources, Kalmar
Latest job alerts …
Louisville, KY, United States
Louisville, KY, United States
Dubuque, IA, United States
JLG 1932R
JLG 1932R 2017
Flesherton, Ontario, Canada
Used - Sale
Mitsubishi FGE35AT
Yokohama, Japan
Used - Sale

Showcased in the Virtual Expo

Fact of the week
On average, people read 10-30% slower from a screen than from paper.
Unicarriers FD80-2
Yokohama, Japan
Used - Sale
TCM FD115-3
Yokohama, Japan
Used - Sale
Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Movers & Shakers
Linda Häkkilä Linda Häkkilä
vice president, Investor Relations, Konecranes
vice president operations, Elokon Group
President, EP Equipment Europe
Senior vice president human resources, Kalmar