Hi to all,
This Nichiyu forklift, Model : FBA25P-60C-400 cannot move ahead or
reverse,
suspect some cable are lose, disconnected or safety interlocked.
The circuit board Nichiyu PB82-40 look fine.
The hydraulic side are working fine.
Can anyone please provide the wiring diagram or manual.
Many thanks in advance.
Showing items 1 - 7 of 7 results.
Hi Jeffrey
Is the problem solved.
I also had the exact same problem
Hey Jeffrey,
I'm glad you could solve it and sharing your repairs.
Kind regards
marcb
Hi marc b,
After replacing 2 nos. TA75902P on PB82-40 circuit board and
1 no. 2SD798 on the Fet Comp. the forklift is working fine
now.
Thanks the the help.
Regards, Jeffrey Mok
Good day marc b,
Thank you for the manual.
The model : FBA25P-60C-400
Nichiyu, Year 1997
Voltage :48V.
Will keep you posted on the outcome.
Best regards,
Jeffrey Mok
hey jeffrey, that's strange that it doesn't give an error. Please control the model again.
kind regards
marcb
Thank you marc b for the support,
It a 1997 model and does not have a LCD, only a hour and volt meter, have check the contact for for/rev and it giving a the correct signal to the control board, but no output signal to the for/rev contactor and speed control Mosfet.
Please forward the FB-60 manual to me,
I need it as a reference.
Many thanks in advance.
My email : [email address removed]
hello Jeffrey, doesn't it give an error message when you put in forward and depress the accelerator pedal, are the direction contactors closing? I don't have a manual for an FB(A)-60 but i have one for an FB-60 and also don't know what the diffrence is between those two models.
kind regards
marcb
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.