error code EE on TOYOTA 5fbe13, DISCUSSION FORUM

Discussion:
error code EE on TOYOTA 5fbe13

Hello Folks.Does anyone know what error code EE means on toyota forklift 5fbe13 on the truck all operating normally but on the display is EE error. If anyone has a solution to this problem please help me, or if there is a service manual for this truck please send me a message on tabak_08 at hotmail dot com.

Thanks in advance.

Posted 30 Aug 2012 03:24
Discussion started by tabak
nas. Karpos, Macedonia, The Former Yugoslav Republic of

Post a Reply Report this post

Showing items 1 - 4 of 4 results.

Sort messages by:

Error code pertains to the communication harness from display to cpu board. Maybe just loose or cpu failure. The DC/SD board at times has had failures due to short on external accessories Remove and inspect all boards for corrosion on and in plugs. Check battery to frame shorts as well. Correct any above 1/2 BV.

Posted 3 Jan 2020 01:14
Reply by ron_k
North Dakota, United States

Ron kornkven

Post a Reply Report this post

Buenos días Alberto. He visto que comentaste lo de error EE en una toyota. Ajustando la velocidad máxima pulse erroneamente y me saltó este fallo. Hay manera de hacer un reset?

Posted 27 Dec 2019 19:39
Reply by ADOLFO_FERRERO
AVILA, Spain

Post a Reply Report this post

Hello!I have same fault. Please, can You help me to fix it?

Posted 29 Nov 2016 17:17
Modified 29 Nov 2016 17:18 by poster
Reply by Krislamov
Nigny Novgorod, Russia

Post a Reply Report this post

CHEK YOUR MAIL.
REGARDS

Posted 30 Aug 2012 16:44
Reply by alberto_l
VALLADOLID, Spain

Post a Reply Report this post

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.