Showing items 1 - 6 of 6 results.
desired position cant be obtianed with said mount have a custom fab mount on trial now thank you for your help
CV60 RAM Mount kit avalible from Intermec.
For 203-784-001 Standard Vehicle Mounting Kit
1 Fasten the base (P/N: 805-588-001) to the vehicle mounting
plate (P/N: M2A-P0900-XX) using four (4) screws
(P/N: 800-416-004).
2 Fasten the assembly created in step 1 to the back of the CV60
using eight (8) screws (P/N: 800-416-004).
3 Fasten the base (P/N: 805-588-001) to the surface where the
CV60 is to be located using four (4) screws
(P/N: 800-416-004). This may require drilling and tapping
1/4-20 holes or to using locally-obtained hardware.
4 Place the CV60 with its attached mounting bracket to the
twin-ball pedestal, orient the CV60 as desired and tighten the
adjustment ****.
Know of any places that sell custom mounts for such a install?
A very difficult installation,indeed. You will prbably need to mount it off of the OHG rightside brace.
Yes it is.With key board and hand scanner.have them clamped to overhead guard now but second teir damage is up 40 %.Dont want them mounted to hood because they do oil checks daily.They want to mounted below hand controls any pics advice or measurements would be a blessing.I need a unit and a truck to fab a mount but customer dosnt want to let one go long enough to make.Any help would be geat Thanks
What model # is the Intermec device,CV60?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.