Linde r15 hydraulic fault - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Linde r15 hydraulic fault

anyone had this fault, linde r15 no hydraulics, when you use hydraulics "L BOOT' comes up on dash.

Posted 3 Feb 2010 06:01
Discussion started by Barney
South Australia, Australia

workin hard or hardly workin!!

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

I recently have had this fault,its normally a wiring fault or open circuit valve on the hvc in reach carriage,mine was a trapped wire which was shorted down to chassis

Posted 13 Feb 2010 01:58
Reply by baggie
midlands, United Kingdom

Post a Reply Report this post

"L BOOT' - it meens that you need to calibrate pedals potentiometer. Try to switch on the truck with right pedal lightly pressed. Good luck!

Posted 3 Feb 2010 07:42
Reply by vittek
Kharkov, Ukraine

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.