Showing items 1 - 4 of 4 results.
if you dont have a sensor in the recovery tank the light should not be on so some points of interest could be: wiring harness near recent repair points, flexible printed circuit on instrument cluster (unrelated to repair) corrosion can occur there and cause bugus warning lights. has the recovery jug been replaced?
Bleeding the air out of the cooling system should solve this.
not on this one, it is just a plastic reservoir.
You do know that the sensor is in the plastic reservoir tank? If that's full and the light is on then try unplugging the sensor switch. If the light goes out then the sensor is bad.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.