1. Home
2. Forums
3. Design & Engineering

Discussion:
toyota fbmf 16 error code

This is my email, sorry for my English that is' really worth, use google translate, so I hope you can understand. Greetings - Franco -

• Posted 21 Jun 2010 08:47
• Reply by franco_c
• Bologna, Italy

-
e-mail: cf1990@libero.it

Post a Reply Report this post

I have TSM002,TSM003 in hand,but I am not sure if they can interchange,so pls check for me,I am appreciated that.

• Posted 18 Jun 2010 20:19
• Reply by Fortliftparts
• Beijing, China

Post a Reply Report this post

Hi Franco,
Can you send me an email (email in signature), I would like to talk to you regarding Toyota card repairs.
Regards Shane

• Posted 29 Nov 2009 23:01
• Reply by controlelectric
• Shropshire, United Kingdom

It takes years to build up trust, and only seconds to destroy it. controlelectrics.uk@gmail.com

Post a Reply Report this post

To do a test you can invert them the two sensors, one on cable and that of the P4 cable P13, also plugs exchanging CSD and CSP. If the C1 error becomes otherwise the sensor is faulty, you should try to replace the card deck of TSM002, even those that are the same as the sensors, both in traction at the pump. Good job. Hello - Franco --

• Posted 15 Nov 2009 07:11
• Reply by franco_c
• Bologna, Italy

Post a Reply Report this post

Your pump current sensor is defect.
Regards

John.

• Posted 15 Nov 2009 02:55
• Reply by johngen
• NB, Netherlands

Email harlekein@hotmaildotcom and djdotdj@kpnmaildotnl

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.