T3404 error code - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster H210HD:
T3404 error code

Have 2 code E 5he and t3404 any ideas would be appreciated

Posted 28 Jan 2025 01:26
Discussion started by Pittboomer
British Columbia, Canada

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Pitt,

Internal transmission speeds are
indicating there is system
pressure present, although
pressure should NOT be there.
Speed sensor failure. Total
Neutral Solenoid failure. Too
much drag because of thick oil.
Sticking or burnt clutch.

Controller reverts to a Shut
Down Mode and will deactivate
the total neutral solenoid.

Check the wiring between
the controller and the speed
sensors. Check the speed
sensors, Check the speed
sensor positions. Check the
Total Neutral Solenoid.
Check oil quality.
For the engine code, nothing could be found. Do you have an LPG or Cummins diesel? You can find the Cummins codes online. Will need serial number to be more specific. Good Luck.

Posted 3 Feb 2025 23:56
Reply by Fishmech
Virginia, United States

The hard to do we do right away. The impossible just takes a little longer.

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.