Showing items 1 - 3 of 3 results.
Vaughn,
There are two kits listed for this model. Need to check and see if the cylinder has any numbers stamped into it. This will be the only way I can make sure kit is correct. Thanks.
Vaughn,
I will check for manual. You can also look at the cylinder to see if any numbers are stamped into the tube. Will follow up tomorrow. Thanks.
You are going to need mast number to get correct seals the number should be on back side of outside rail facing operator
Without it no one can help get correct seal kit
May take some searching but it is stamped on rail
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.