Showing items 1 - 9 of 9 results.
Sounds like it could be a upa controller
Set to 9 ks and unable to change
Everything there is also OK, set to 20 and the option is turned off
Go to the switch controlled speed tab and check what it is set to there
It is not possible to change anything if the speed is 9 km/h.
Less - ok I change
More - no change
That's why only 9 ks
Change pump to 100 and Tom to max
You can set the rpm and pump angle but the sumaric is not allowed to exceed 9 km/h
1510 rpm and 40% pump angle as I remember.
Copying traction files from other ECU's doesn't help.
What is the max engine rpm set too and the pump angle?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.