Showing items 1 - 3 of 3 results.
They are just sitting in bottom doing nothing
You remove them and put them in holes on brake
Thread I'm all the way, they stop.
Now you should be able to turn that top disc
Thanks for replying.
Just so I'm clear, I have included a pic with what I think I should do.
I move the brake lock bolts from the bottom up to those holes in the top.
When I screw them in, am I **** all the way down to lock something or am I just threading them in a bit just to hold the screws so they dont get lost.
In other words, once I remove them from the bottom is the brake released?
It doesnt look like I can attach a pic so hopefully this screen shot link will pass
https://snipboard.io/H3skZK.jpg
thanks
All Raymonds have bolts that go into top of brake to unlock brakes. They usually are just sitting close by. partly threaded in, just standing up. remove them and screw them in 2 holes on top of brake
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.