mast dropping - Technical Troubleshooting discussion in Forkliftaction's forums

Combilift C6000CB:
mast dropping

when lifting something heavy in 2nd stage, the mast will drop quickly, not so much in 1st stage. any helpful ideas would be appreciated, thanks

Posted 16 Jun 2022 23:08
Discussion started by Steve_
Ohio, United States

steve_22

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Hi Steve,
If the 1st stage cylinders are not causing a drop and it is linked to the 2nd stage cylinders then it may be just a seal set in them or a blocked open poppet valve in the cylinder.
Combilift has a simple procedure to test if it is the valve bank, or mast. If mast, then what cylinder is causing the issue. You will need a gate valve.

For free combilift Support you can submit a ticket at https://warranty.combilift.net/technical-support-form/

Hope this helps.

Posted 16 Jun 2022 23:24
Modified 16 Jun 2022 23:31 by poster
Reply by Richard_Irwin
Monaghan, Ireland

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.