Linde E14-02 tilt error 36) - Technical Troubleshooting discussion in Forkliftaction's forums

Linde (& Baker) E 14-02:
Linde E14-02 tilt error 36)

Hey,

I have a Linde E14-02 (335) forklift, it has error 36 on (joystick tilt error).

The tilt function of the mast sometimes fails as a result.

I have read the tilt joystick, these are +/-14% sent out. If I install a new one, the problem remains the same. calibration doesn't work either.

If you switch off the machine from the ignition, it is just as good (0% control tilt joystick) after a few minutes this percentage starts to increase.
I have measured the wiring harness from joystick to controller, it is also good.

Does anyone have an idea where I should look for the problem?

Posted 24 Sep 2021 00:20
Discussion started by Forklift123
Netherlands

Mechanic of Forklifts, Aerial platforms & telehandlers in the Netherlands

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Hello....weard problem....maybe the controller is broken but before that i think you should take out the anti static....if u have gray tires problem will incrise. ground your lift truck with anti static strap and joystick pad too. (wire to frame)

Posted 27 Sep 2021 02:27
Reply by Justus
Finland

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.