1. Home
2. Forums
3. Technical Troubleshooting
4. Crown
5. RC5500

Crown RC5500:
Mast raises when turning

Whenever this happens you need to make sure the multitask handle base is not worn out before replacing your lift/lower pot, the detent worns out causing the issue. Generally I replace the base and the pot since I'm already in it.
Ps: excessive play on multitask handle is an indicator of a worn out base.

• Posted 3 Apr 2021 03:57
• Modified 3 Apr 2021 04:09 by poster
• Reply by cubapnea
• Florida, United States

If it ain't broken...you know...

Post a Reply Report this post

Sounds like the lift pot needs to be calibrated. you can also check the phillips screws on the inside of the yellow half-sphere shaped cover. they come loose and cause unwanted play in the handle that effects neutral position for lift and travel

• Posted 3 Apr 2021 02:03
• Reply by Triggs
• California, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.