need help! i went on no run ,call the unit starts and goes into 30sec shutdown.let set couple minutes does same starts and shuts down but if as soon as it shuts down I try to start I get 3
interlocks hyd,seat,return to neutral,the strange thing is no codes.I'm thinking vsm any help and advice would be appreciated.and I would like to get a copy of fault codes @ trouble shooting for vx trucks
Thanks Smoken
Showing items 1 - 7 of 7 results.
There are over 3000 fault codes. The manual is 1400 pages. You need to contact your local dealer and purchase the manual.
Hey Man, I have previously had the same issue. crank the truck and it immediately goes into engine shutdown. there is a sensor on the radiator without enough coolant the engine goes into shutdown.
quality product! happy days.
tugmaster. i had that fault this very week on one of our own brand trucks. dodgy rear light replaced and update of vsm. sorted
check your lights are working.check the wipers work.if they dont the truck considers this a safety issue and shuts the truck down.
scroll the up/down buttons on the dash.if it on 30 sec shutdown it should give you a reason
just a w.a.g.; key switch. bad contact on "run" position? shuts off fuel? that would explain "no code".
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.