Discussion:
Not being detected

Have bought hyster pc service tool version 4.95 and the previous version was 4.91 when trying to connect to the truck using pc tool the model is not available from unit code section any assistant will be of great help.
  • Posted 14 Sep 2020 13:42
  • By Joshua_Mwanjala
  • joined 14 Sep'20 - 4 messages
  • Kenya
JM
Showing items 1 - 4 of 4 results.
Hi,
where did you buy the PC Service Tool and was your previous version good for a series A285 lift? I'm told my Utilev UT25P can be accesssed using the H-Y PC Service Tool but there is so little support for this brand. Thanks, mike
  • Posted 5 Feb 2022 09:52
  • By MICHAEL_SPOSATO
  • joined 5 Feb'22 - 8 messages
  • New Mexico, United States
Mike Sposato
Dear Sir, I trust you are well today, kindly advice me where can i get this Dana dashboard for
transmission, and does it use same Hyster diagnostic cable different one kindly advise.
  • Posted 9 Oct 2020 09:19
  • By Joshua_Mwanjala
  • joined 14 Sep'20 - 4 messages
  • Kenya
JM
Dear Sir,
I trust you are well this morning, thanks for the information will share with our Mechanic regarding the same, as per your advice.
  • Posted 29 Sep 2020 16:07
  • By Joshua_Mwanjala
  • joined 14 Sep'20 - 4 messages
  • Kenya
JM
most likely Hyster has removed support for the XM series you have as it doesn't need pc service tool to read codes etc check teh patch notes with the update. when i worked on them we never used pc service tool as codes all come on dash and once fixed codes went away. We did use dana dashboard for the transmission every now and again but it was rare hope this helps
  • Posted 25 Sep 2020 16:27
  • By Applez
  • joined 25 Sep'20 - 3 messages
  • Victoria, Australia

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Upcoming industry events …
October 6-9, 2025 - Detroit, MI, United States
October 6-9, 2025 - Detroit, MI, United States
November 14, 2025 - Melbourne, Australia
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".
Upcoming industry events …
October 6-9, 2025 - Detroit, MI, United States
October 6-9, 2025 - Detroit, MI, United States
November 14, 2025 - Melbourne, Australia
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025