Hello,
Firstly, sorry for my bad English.
I will do my best.
I'm owner of a Jungheinrich EJC212 (year 2008) which is displaying the following error codes : C016 and E044.
The forklift don't move anymore.
I looked for the error code list on the web, but i don't find this.
Could you give me some advices?
Or just the link for the error code list for my forklift.
Thanks in advance.
Best regards
Patrick
Showing items 1 - 8 of 8 results.
Ohhh yes!
It's ok!
I open the main unit and i found a little plug unconnected.
I replug it and my forklift is now alive!
Thanks a lot for your help!!!
Hi, i found someone to lend me a brake for test.
I connect the brake but the forklift indicate always c016 /e019.
Where can i look in the forklift?
Thanks in advance
Wow, very fast reply, thanks!
This replacement could solve the 2 errors codes?
I have no replacement brake for the moment.
For test, can i put a 11ohms 50W resistance between the 2 wires?
Hi
. start by replacing or repairing the brake
Hi,
Today i mesure the resistance. It is 0.9 Mohms not 11 ohms...
The brake should be damage...
I power on the forklift again but the codes are now C016 E019... why are they change?
What is the signification of the new codes?
Thank you very much for your help!
Patrick
Hi,
resistance should be 11 ohms. +-
Hi, thanks !!
I will look at that.
Can you give me the resistance value?
Or i just need to look if the resistance is not cut ou in short cut?
Thanks again!!
hi Patrick. You have problem with electri? brake.
measure the brake resistance. Check the wires leading to it.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.