Crank no start - Technical Troubleshooting discussion in Forkliftaction's forums

Unicarriers (& Nissan) 1F1/1F2:
Crank no start

The lp level warning/rack lock light is on but there is lp and as far as I can tell the rack lock switch has never had any wires hooked up to nor is there any in its vicinity I'm thinking maybe fuel pressure sensor but I can't get it started to test it

Posted 4 May 2020 23:57
Discussion started by Quinton_Baker
Wisconsin, United States

Qbaker

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Thanks man yea that was not on there correctly and the vaporizer needed a rebuild

Posted 6 May 2020 08:47
Reply by Quinton_Baker
Wisconsin, United States

Qbaker

Post a Reply Report this post

You need to make sure that you fuel hose connector is threaded on completely. There should only be a gap about the thickness of a half dollar between the coupler and the tank valve. If another tank was put on sometimes the square ring from the old tank will come out and sandwich between the coupler and the valve also not allowing the valve to open. There is a sensor on the line under the radiator cover panel.

Posted 6 May 2020 08:45
Modified 6 May 2020 08:46 by poster
Reply by mwjski
Montana, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.