wont move - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster W45Z HD:
wont move

i replaced the proxy sensor the machine lifts and horn works but now it wont move at all i checked all wires and connections all that is good any suggestions

Posted 6 Sep 2019 22:00
Discussion started by Greg_Tapp
Massachusetts, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Could be a problem with the tiller card or the main controller.

Posted 6 Sep 2019 23:37
Reply by BREWSKI
Nebraska, United States

BREWSKI

Post a Reply Report this post

Moved tiller. prox is working. Tried moving the truck in turtle with handle up. No movement or code shown. it did beep twice when entering turtle mode.

Posted 6 Sep 2019 23:19
Reply by Greg_Tapp
Massachusetts, United States

Post a Reply Report this post

There should be a red led that lights when you lower the tiller. If it lights and the truck does not move there is a different problem. Try pushing the turtle button and rotate the directional ****. Do this with the tiller fully raised. If the truck moves the problem is in the handle sensor. Watch the display to see if you are getting an error message.

Posted 6 Sep 2019 22:32
Reply by BREWSKI
Nebraska, United States

BREWSKI

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.