Showing items 1 - 3 of 3 results.
Sounds like worn piston seals at one of the tilt cylinders,causing internal leakage
Would go for the ram seals first that's the likely culprit
It's most likely one of the seals in the hydraulic tilt valve have gone bad. follow the tilt lever assembly below the dash and remove the front floor section and you will see all the valves grouped together. A new replacement is quite expensive ($3,000), however they are rebuild-able and the seal kit costs less that $100.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.