Termination resistor - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster S70FT:
Termination resistor

Can anybody tell me where the termination resistors are located on an S70ft ft

Posted 26 Jan 2019 10:02
Discussion started by terry_c
Oregon, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

go to diagnostic port and check ohms on yellow and the green wire I think is the light green wire it should read about 58 to 60 ohms. if not reads 120 ohms you have a broken wire or ONE OF THE CAN BUS controllers have failed.it also check wiring connection plugs. put email in your profile

Posted 9 Feb 2019 23:57
Reply by redbull
Queensland, Australia

Post a Reply Report this post

S70FT F187V11051E. [email address removed]

Posted 2 Feb 2019 03:40
Reply by terry_c
Oregon, United States

Post a Reply Report this post

serial number and email

Posted 1 Feb 2019 18:46
Reply by redbull
Queensland, Australia

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.