Showing items 1 - 5 of 5 results.
I have a similar problem, did you find the solution?
Check the motor cover switch's.
If you can still manually lower the platform after it stops, then the cylinder is ok. Check resistance through the lowering switch. If there is 1 ohm or more, that will give you lower-than-battery volts causing the coil not to work. Pretty sure under 20v....it will not always work
No Codes :( I'm thinking maybe there is a problem with piston and spring inside the lift cylinder ??
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.