Hyd Pot - Technical Troubleshooting discussion in Forkliftaction's forums

Yale OSO30EBN24TE095:
Hyd Pot

Hi,

I have a problem with my Yale orderpicker.

M# OS030BEN24TE095
S # D836N02870E

I have «Hyd Pot» on the curtis BDI. I tried alot of things.

-I moved the hydraulic pot manualy, but nothing change.
-I replaced the joystick, recalibrated the pots. The orderpicker works greats for 10-15 min and the code comes back again.
-I replaced the joystick again (maybe I received a defect one) and recalibred... but same problem... The orderpicker works great, and stop in less 15 minutes...
-Send the VMC card to a manufactory reset, but the code comes back again...

Its like the calibration don't work ( maybe I missed a step? ) or the card is defect? Maybe someone have seen this before ?

Posted 24 May 2018 11:09
Modified 24 May 2018 11:10 by poster
Discussion started by Meden64
Quebec, Canada

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Just to close the post. Maybe it will help another person in the futur... It was a bad controller. I orded a new one and now the opc works well.

Thank you BREWSKI !

Posted 7 Nov 2018 08:54
Reply by Meden64
Quebec, Canada

Post a Reply Report this post

If this has the 1310 controller it might be a internal failure in the controller.

Posted 24 May 2018 22:22
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.