No brake pedal after I ran placed the brakes and bled them - Technical Troubleshooting discussion in Forkliftaction's forums

Cat Lift Trucks (& Caterpillar) DP40KL:
No brake pedal after I ran placed the brakes and bled them

I'm working on a car FD40KL. I needed to replace the two parking brake cables so I replaced the brake shoes while I was in there. After replacing the shoes I bled the system and had no pedal. It would go to the floor. I bled the system several times and same result. I can't find any leaks and bled the system altogether about an hour. I had good brakes before I did any of the work. If there are any suggestions anyone has for me I would greatly appreciate it.
Thanks

Posted 2 Mar 2018 02:22
Discussion started by marty_t
Illinois, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

When you adjust the Brake Shoes up be sure the Hand Brake is off and that there is plenty of slack in the new Hand Brake Cables, after the shoes are adjusted where they just start rubbing the Drums,then Bleed again and fill Master Cylinder reservoir with Brake Fluid, and then adjust your Hand Brake up !

Posted 7 Dec 2019 03:16
Modified 7 Dec 2019 03:17 by poster
Reply by cottoncuz4
Texas, United States

Post a Reply Report this post

How is the brake shoes adjustment? How much drag is there when trying to turn the wheels by hand?

Posted 10 Mar 2018 04:13
Reply by bbforks
Pennsylvania, United States

bbforks (at) Hotmail (dot) com
Customers love technology- until they have to pay to fix it!

Post a Reply Report this post

How is the brake shoes adjustment? How much drag is there when trying to turn the wheels by hand?

Posted 10 Mar 2018 04:13
Reply by bbforks
Pennsylvania, United States

bbforks (at) Hotmail (dot) com
Customers love technology- until they have to pay to fix it!

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.