Showing items 1 - 5 of 5 results.
Got it. Man I sure do appreciate your help. Have a good one.
They are not the only ones. Have you loosened the clamp bolt on the yolk? This will make unscrewing the ram a lot easier.
BREWSKI and Mrfixit, thanks for your responses. Unfortunately the pin does not have the threaded hole in the end of it. I attempted to unscrew the shaft, but it is extremely tight. I will go back and try this again. In the meantime, if anyone has other suggestions, please let me know. I cannot believe Clark designed this lift in a way that the pin can't be driven out.
The end of the pin may have a threaded hole in the center to screw a bolt into to help pull it out.
You have to remove it from the inside out. The second option is to unscrew the ram from the yolk and remove the cylinder.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.