Showing items 1 - 4 of 4 results.
Yeah, or somethings is jammed in there by the tilt cylinder, Thanks Cooter
Code 64 is a Tilt solenoid 1 abnormality.
The tilt solenoid should be aprox 10 ohms at the solenoid.
If you want to check the complete circuit remove connector 1 from the the SAS controller should be 26 pin connector. Check from pin 13 light blue wire to pin 24 white with a black stripe.
Code 64 is for the SAS it is either the height switch, switch on right side tilt cylinder or pressure switch in middle of mast. Rich
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.