1. Home
2. Forums
3. Technical Troubleshooting
4. Toyota
5. 8BRU18

Toyota 8BRU18:
8bru23 retracting when I side shift to the right or when I fork up.

I originally thought it would be a working issue going through to the carriage but I have shot every wire in that area going back and I even did a hang test for the handle but it's still not fixed I had the idea to swap the solenoids over and see if the problem changes to exclude then as possible causes

• Posted 28 Sep 2017 23:43
• Reply by joshua_v
• Texas, United States

Post a Reply Report this post

could be a bad control solenoid on the pentograph control manifold or maybe a problem with the control handle.
If you are not familiar with reach trucks i would get someone that is.

• Posted 27 Sep 2017 23:43
• Reply by swoop223
• North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.