How to calibrate the steer sensor - Technical Troubleshooting discussion in Forkliftaction's forums

Crown RR5795S-45:
How to calibrate the steer sensor

I install the gear for steer sensor with the hole align like shown. i then followed directions to calibrate steering but it reads failed. I do have reverse steer on my liifts.

Posted 16 Nov 2016 23:18
Discussion started by mcguyver
Mississippi, United States

Do it right the first time.

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Glad to hear you got it. Followed one that would calibrate but fail in operation and it was upside down.

Posted 21 Nov 2016 10:01
Reply by popeye
Ohio, United States

Post a Reply Report this post

I figured out what I did wrong,lol I installed the sensor on the under carriage facing the wrong way. The wires should be facing to the right. I had the slot in the gear in the correct postion.

Posted 21 Nov 2016 00:49
Reply by mcguyver
Mississippi, United States

Do it right the first time.

Post a Reply Report this post

Did you use the carpenters square as directions stated?

Posted 20 Nov 2016 15:57
Reply by popeye
Ohio, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.