Won't key on random screen codes - Technical Troubleshooting discussion in Forkliftaction's forums

Raymond EASI REACH:
Won't key on random screen codes

Machine won't do self check on key up just pulls out random codes or 'l's on screen every 50th try it will do its self test and work fine turn key off and goes back to random codes tested shorts to around and voltage test everything led to system card changed card still does same thing light has constant flash on card attached to system card any ideas would be a help thanks

Posted 11 Mar 2016 06:01
Discussion started by hayden_j
British Columbia, Canada

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Through my experiences since this trucks release I have found that this problem will only be the vfc or odi card. Vfc is much cheaper and 9 tines out of 10 will be the problem. The power card has no bearing on communication problems typically power card will be 20 series codes.
If you have another truck you can swap vfc cards primary memory is held in the odi and will overwrite vfc memory every key cycle.

Posted 11 Mar 2016 22:53
Reply by stam
Ontario, Canada

Post a Reply Report this post

Ok I just ordered vfc and power card will advice

Posted 11 Mar 2016 09:57
Reply by hayden_j
British Columbia, Canada

Post a Reply Report this post

Vfc bad.

Posted 11 Mar 2016 09:44
Reply by stam
Ontario, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.