Starting issues - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Starting issues

Clark CGC25

Ser# C365L-0145-9475
4G64 engine
Erratic power supply issues to ignition coil, sometimes with key in crank or run position (switch tests ok)Are there any common ignition issues with these trucks?
Must be a relay, diode or box that controls this. Any ideas or wiring schematics would be great.
Thx

Posted 20 Feb 2016 00:25
By BrewCrew
joined 18 Nov'08 - 108 messages
Ontario, Canada

We`re here for a good time

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Hello. We had a similar issue. they had a problem with premature failure on starters back in the day.

they resolved the issue with a start relay - little black box 1 x 2 x 3 inch size.

some were installed close to the starter others up under the dash.

Hope this helps

Posted 20 Feb 2016 04:35
By Prentice
joined 25 Jun'08 - 600 messages
Ontario, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.