hyster e50a problem - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster E50B:
hyster e50a problem

Hi. New guy here. Thanks for having me on you forum.

My poor old lift just started a new problem. Battery is fully charged. With the key on nothing responds. The lift starts moving forward at creep speed when the battery cable is plugged in. Key can be on our off. I figured power would be controlled by the switch. Removed switch and disconnected wires. No effect. I've looked on the web but can't find a wiring diagram. I'd appreciate any insight you might have.

Posted 31 Dec 2015 06:13
Discussion started by Cabinetmaker
OK, United Kingdom

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Got lucky today. Pulled the lower side cover to investigate. I must confess I've never been into a lift before, but I do know my way around machines, switches, and even Porsche motors. I used a rubber handle mallet to manually operate the different switches and found one stuck in the on position. Disconnected the battery and sprayed all the contacts with cleaner and viola! Back to normal operation.

Posted 31 Dec 2015 06:56
Reply by Cabinetmaker
OK, United Kingdom

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.