1. Home
2. Forums
3. Technical Troubleshooting
4. Crown
5. 30SP36TL

Crown 30SP36TL:
Electric Brakes function

Ser #1A120646
this unit has electric park brake which applies about 6 seconds after release of dead man. Should the breaks apply immediately once the dead man is released?

• Posted 2 Dec 2015 09:31
• Discussion started by tom_p
• Alberta, Canada

Post a ReplyReport this post

i hope to receive a manual for a Crown SP36 in about a week.If it is a service manual i will let you know. Does your lift have electric brakes?

• Posted 15 Dec 2015 04:55
• Reply by tom_p
• Alberta, Canada

Post a Reply Report this post

I have a Crown electric
MOD# SP3020-30
SER# 1A242385
I am trying to figure out how to adjust the brake on it.

• Posted 15 Dec 2015 02:25
• Reply by travis_q
• Texas, United States

Post a Reply Report this post

thanks again for the input, i have access to a Crown SP36 service manual would this cover the 30SP36TL model and provide the correct brake adjustment and wiring info.

• Posted 10 Dec 2015 09:24
• Reply by tom_p
• Alberta, Canada

Post a Reply Report this post

smooth stopping is done by "plugging", emergency stopping is done by removing your foot from the "dead man".

• Posted 4 Dec 2015 03:13
• Reply by edward_t
• South Carolina, United States

"it's not rocket surgery"

Post a Reply Report this post

Thanks

• Posted 3 Dec 2015 07:55
• Reply by tom_p
• Alberta, Canada

Post a Reply Report this post

brake should apply as soon as the foot is off the dead man.
unit should not travel more than it's length, after removing foot from deadman.

• Posted 2 Dec 2015 23:47
• Reply by edward_t
• South Carolina, United States

"it's not rocket surgery"

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.