troubleshooting startup - Technical Troubleshooting discussion in Forkliftaction's forums

Raymond EASI REACH:
troubleshooting startup

one of my customers has a Raymond Esai standup reach-fork. I'm not familiar with this model at all. On start up the UI says Deadman? and nothing functions. I was standing on the plate when I turned the key on and the deadman switch tested good. This thing sat for 5-6 years and was dead as a doornail. no manual or schematic available. Is there a start-up procedure for this thing? Or is there a common malfunction that causes this readout? any help is appreciated

Posted 24 Nov 2015 01:04
Discussion started by Mac50
Pennsylvania, United States

mac

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

if you are on the deadman pedal during selftest it will display deadman? it thinks the deadman switch is stuck closed.
the pedal has to be in the released position until selftest passes you will hear the horn beep then its ready. it does this so it can verify the braking system is holding and the traction system is operational.

Posted 24 Nov 2015 05:42
Reply by stam
Ontario, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.