Need a CLARK part # or Wagner cross reference # - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Need a CLARK part # or Wagner cross reference #

The nearest Clark dealer is about 3 hours (one way) from here. My old Clark CFY40B needs a master cylinder or a master cylinder rebuild kit. I can't find either.

If I had the Clark part number..I'm sure my local NAPA could cross reference it and get me a rebuild kit.

The part number on the master cylinder is WAGNER Lockheed FD 6656. It has a 1" bore..standard 1" seals.

Would appreciate any help.

thanks

Posted 19 Apr 2008 06:11
Discussion started by ZipTow
New York, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

roadrat:

Took the master cylinder down to my local NAPA, the kid wasn't real sure what I had. Requested that he try to cross reference the part number...after another blank look I just left.

The cylinder has (3) 3/8" mounting holes centered 2-3/8 inch apart on the back (triangular pattern). There is only one line coming out the front.

I found one at helmarparts.com that looks just like it. Helmar part # 0170209-00 for $18.00. I called about it but they didn't have it in front of them to measure it up. If the bolt pattern is the same...I know it would work.

I have seen the one you describe. All I need is the round neoprene seals. Already honed it out... the bore even looks new.

Thanks
Ed

ALSO: There is one on Ebay auction number
140224525856 (the one on the right) that looks just like it.

Posted 19 Apr 2008 12:42
Modified 19 Apr 2008 12:49 by poster
Reply by ZipTow
New York, United States

Post a Reply Report this post

Does that master cylinder have two 3/8 inch holes through the side that go all way through to mount it?
The NAPA store should be able to use that Wagner
number, I have had good success in the past

Posted 19 Apr 2008 12:00
Reply by roadrat
North Carolina, United States

"ARE WE HAVING FUN YET?"

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.