Toyota 8FGU25:
no hydraulics.

no hydraulics, found pump locked up. as a result of that the pump drive chain broke. checked gears and bearings. all OK. anything special i should know about installing a new chain,front seal,crank seal.? any possible reason for pump lock up. hrs.11,152.
  • Posted 15 Jun 2015 07:11
  • Discussion started by mechNtraining
  • Oklahoma, United States
Do it Today or Tomorrow But You will Do it.
Showing items 1 - 1 of 1 results.
pump locking up not a good thing
first i would pull the filter and cut it open and check for metal, also take the locked up pump apart and see how bad the impeller(s) are, if it is bad you probably have alot of metal in the system too.
if you find any you will be having to flush out lines etc to remove any residual metal in the system.
If you do not do this you will be damaging the new pump when it pulls loose metal into it.
It's a big job to do but is necessary when a pump goes out.
  • Posted 15 Jun 2015 21:42
  • Modified 15 Jun 2015 21:43 by poster
  • Reply by swoop223
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

PREMIUM business

VETTER Industrie GmbH
The world's most comprehensive range of forks and the most intelligent sensor fork for more safety and efficiency.
Latest job alerts …
Dubuque, IA, United States
Louisville, KY, United States
Louisville, KY, United States
Aichi RX07B
Yokohama, Japan
Used - Sale
Aichi SR10C1SM
Yokohama, Japan
Used - Sale
Movers & Shakers
Linda Häkkilä Linda Häkkilä
vice president, Investor Relations, Konecranes
vice president operations, Elokon Group
President, EP Equipment Europe
Senior vice president human resources, Kalmar