Ads
News service and business centre for materials handlingHOME
DISCUSSION FORUMS : Forkliftaction.communicate
trans not engaging - codes
hello, i have a hyster 210hd w/ Cummins LPG. s/n G007E03126D

i have been having this intermittent problem where the trans won't engage after start-up. i get a hard fault and an alarm and the little service light comes on. normally i can clear the fault by re-starting the truck but it does not work anymore, its stuck. last week i noticed the fault came up when i shifted into rev. i restarted and shifted into forward then back into rev. and it worked. now i cannot get around, it comes on every time i start it. i am not sure what direction to look in other than its tranny related. my best guess is maybe neutral switch issue. here's the funny part, it does show a code on the display, however the display is damaged and i am unable to accurately read it. any tips, tricks, suggestions, or advice would be greatly appreciated

There is always a reason!
  • Posted 15 Apr 2015 01:34 PM
Total replies: 3. Showing items 1 - 3 of 3 results.
Replies
  • swoop223
  • North Carolina, United States
since you cannot see what the error code is then it would be a long shot guess as to what is causing this fault.

i did check in hypass for this truck by the serial number you gave and it did reveal a service gram about a switch issue
(gram number CI00033, SUBJECT: TE-10, TE-27 & TE-32 Transmission Pressure Feedback Switch and Harness)
It says the switch can go bad due to an internal membrane failure causing the symptoms you describe but this does not mean that is what is wrong with it, since we can't see the code we would still be guessing at it.

Your best bet is to call hyster and have them send out a tech to hook up to the machine and see whats going on.

You've been swooped!
swoop223@gmail.com
  • Posted 16 Apr 2015 01:36 AM
i do not have any reliable hyster service for quite a distance in any direction in my area, which leaves me with me. could you explain to me where this pressure switch is located on the transmission. is there any tricks for removal? also, there must be a way i can read the codes its displaying, is there a way to purchase either a new display for the unit or a code reader for it, or both? do you have a short list of transmission codes that i could try to compare?

one more thing, how can i find out some more detailed information about this forklift. things like the year, trans type, engine type and other related info would be helpful. i know very little about this truck and it is good to know your equipment, especially when you need service.

There is always a reason!
  • Posted 20 Apr 2015 11:56 AM
  • swoop223
  • North Carolina, United States
the sensor is located inside the cover assembly on the transmission control valve. It is at the end of the control valve and has the harness made onto it.

and yes i was going to suggest replacing that display so you can see whats going on, its pretty important to be able to see things there :o) The only other way to access the system that i know of is with laptop diagnostic program from hyster. Purchasing a service and parts manual would be a good idea in your situation. They will not sell you the diagnostic program, that is a certified dealer tech only item not available to the public.
You can diagnose most of what is going on with this truck through the dash display so get that taken care of first.

as for finding out information on your machine, your dealer can give you that over the phone when given a full model and serial number. The engine type and other information should be on a dataplate on the engine.
The transmission should have it's own dataplate with information on it.

You've been swooped!
swoop223@gmail.com
  • Posted 20 Apr 2015 10:07 PM
Total replies: 3. Showing items 1 - 3 of 3 results.

Having trouble using the Discussion Forums? Contact us for help!

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Ads


©Forkliftaction.com
Forkliftaction Media Pty Ltd
PO Box 1439
Milton QLD 4064
Australia
Contact Forkliftaction.com
About Forkliftaction
The Forkliftaction Team
Privacy Policy
Site Map
Help
Business Directory
Discussion Forums
Industry News
Events Calendar
Jobs & Resumes
Photo Galleries
Blog articles
Our Bloggers

Industry Brands
Company Index
Regions & Countries
Machinery-onQ.com

Advertise on Forkliftaction
Editorial Features / Calendar
Featured Businesses
Past News Editions
Industry Associations
Storing your login information automatically.

When you select the 'Remember me' option, your login information will be stored on your computer in the form of a cookie. When you visit Forkliftaction.com again, the stored login information will be retrieved automatically and you will not have to submit your login parameters (email address and password) each time you want to visit our members-only pages.

A cookie is a small piece of data that is sent to your browser from a web server and stored on your computer's hard drive. A cookie can't read data off your hard disk or read cookie files created by other sites. Cookies do not damage your system.

x