hard steering only if not moving - Technical Troubleshooting discussion in Forkliftaction's forums

Yale GLP040RDNUAE:
hard steering only if not moving

Hello guys. I have a Yale GLP040RDNU it's a '95 truck. The steering is hard/ no power steering when truck is not moving but hydros ok. You move half an inch either fwd or rev, steering is ok. Jacked it up, ram ok/ not bent, drag link ok, king pin ok, everything mechanical ok. Overhaul steer cylinder thinking possible piston seal- same thing. Replaced orbital thinking that was it- same thing. Can't be the pump since it picks up 3000 lbs no problem. Any pointers?

Posted 19 Mar 2015 16:50
Discussion started by HIlifthigh
Hawaii, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Thanks, I'll check on it. Ran out of options and not too familiar w/ Yales. Also forgot to mention, I did clean suction filter in tank and replace element.

Posted 21 Mar 2015 14:54
Reply by HIlifthigh
Hawaii, United States

Post a Reply Report this post

I think your truck has a priority valve that delivers oil from the main pump to the orbitrol. The priority valve should be in the rear of the main pump. Follow the pressure hose from the orbitrol and see where it comes from.

Posted 20 Mar 2015 23:37
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.