Hello, first time here.
No forward or reverse, no clicking when trying. The unit does lift and lower.
I did check continuity of the forward and reverse switches in the handle but did not check the speed control potentiometer. At the controller, without a schematic, I was able to find the same continuity from the switches. I am assuming the wiring is good from the switches to the controller. Battery is 99% and I do have power at the controller. Any suggestions or wisdom would be appreciated.
Thanks, Eric
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.