Showing items 1 - 14 of 14 results.
Hi john, D794 as per ccode, on the manual number 22 on list
Is there third code 9183 and 1111 aren't getting me access
9183 doesn't allow full access.. is there a third code ???
1111 allows certain access but I want to clear fault codes
DCG codes are in the operator manual that should be in the truck
Hello Gentlemen.
I Need your help.
We have 8 Kalmar in the company and they have some error codes and we can't find the error codes in the list what I got.
I have a list of the Kalmars but I can't find the Right numbers.
Could anybody give me a Website or a list of error codes from Kalmar DCG 160-12 and DCE 150-12.
It would help a lot if anybody could help me.
Thank you very much Gentlemen.
11111 for diagnostic <<
45454 to reset service
44241 for initiation <
Hi all,
Can anyone please help in clearing the error codes stored in a DCE truck ?
Any experience with this ?
Best regards,
Vasil
Thank you for using our Forums but......
Forklift manuals are almost all considered "proprietary information". The only proper place to get them is from your local dealer who is the legal representative of the manufacturer. We all need to respect the intellectual property rights of the copyright holders.
Our Forum Readers can answer specific questions about particular concerns, and even quote small sections of the manuals (it's called "fair use" to intelligently discuss the particular concern), but cannot be seen as trying to get around the rights of the copyright holders (usually the manufacturer).
So please just describe your problem (without asking for a manual) and we are sure there are folks on the Forums here who can give you very well considered opinions about those concerns.
Best wishes
From
Forum Admin
can any one helps me for dce 80-45 e7 part and workshop manual i want
9183 doesn't allow full access.. is there a third code ???
1111 allows certain access but I want to clear fault codes
Thanks tomas g
It works !
It helped me a few months ago ;-)
Thanks michel v for your answer but this one is for DCE.
There are 45454 and 44241 for the DCE.
But for the DCG, it's a code with only 4 numbers.
Post your Reply
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.
Having trouble using the Discussion Forums? Contact us for help.