1. Home
2. Forums
3. Technical Troubleshooting
4. Yale
5. OSO30BEN24TE131

Yale OSO30BEN24TE131:
error message

depending on which steering controller this truck has:
EPSIII
you may also want to check the encoder spherical connector that connects the pot to the steer gear shaft. I've seen those break and cause errors like this. The set screws can come loose or the coil in the connector can break. Ultimately the encoder may just be faulty.

APS steering
could be a bad position sensor

• Posted 23 Oct 2014 22:41
• Reply by swoop223
• North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Steer encoder error channel count mismatch


Possible causes...

Check wiring to encoder.
Check both encoder output channels using voltmeter; voltmeter should pulse with encoder rotation
. Check for chassis ground in contact with encoder housing.
Check for wiring problems on external 1243 capacitor.

• Posted 23 Oct 2014 10:17
• Modified 23 Oct 2014 10:20 by poster
• Reply by kevin_t
• Pennsylvania, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.