Alarm codes 01, 58 - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster P1.8:
Alarm codes 01, 58

Hi! I have a P1.8 electric pallet with the following alarms:

AL 01
AL 58

Could anybody help me? I don't know the meaning of these alarms.

Thank You in advance.

Posted 17 Oct 2014 06:12
Discussion started by manolo_garcia
Madrid, Spain

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Alarm 01
EVP NOT OK
This alarm is not generated on model S1 S2 = 0 0
Proportional valve open in standby condition; in travel, the proportional valve is either too open or too closed with respect to the applied pwm.

Alarm 58
NO FIELD CURRENT
Field current fault.
Possible causes:
a) current transducer fault;
b) fault in the field power unit.

check your power circuit fuse(s) and make sure they are not blown or broken

Posted 17 Oct 2014 21:53
Modified 17 Oct 2014 21:54 by poster
Reply by swoop223
North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.