Hyster S30XL:
Regulator issue, lift not starting, leaking propane from carb?

So apparently my regulator just isn't working anymore and I'm getting too much propane causing it to not start and having the excess forced out through a carb valve.

Does this sound correct to anyone?
  • Posted 19 Sep 2014 02:10
  • Discussion started by Johnnycoldcuts
  • Pennsylvania, United States
Showing items 1 - 5 of 5 results.
teflon tape is bad for any fuel system on any truck with a Oxygen sensor in the exhaust system (the tape part being made of a large % silicone) but your truck does not have an 02 sensor in the exhaust.
  • Posted 19 Sep 2014 08:04
  • Reply by edward_t
  • South Carolina, United States
"it's not rocket surgery"
I was told that teflon tape is bad to use when dealing with propane, I'm not trying to mess anything up.

thanks for all the help!
  • Posted 19 Sep 2014 05:10
  • Reply by Johnnycoldcuts
  • Pennsylvania, United States
You can get a regulator and the filter lock at any place that deals with forklifts, I would think. Should be easy to do (this is your personal forklift, right?). Make sure you use sealer or Teflon tape on the pipe threads of the fittings. No need for sealer on the actual hose connection that has a flair in it. Be careful when you bleed out the LP gas from the hose as you take it apart (tank is shut off but still has gas in the hose). Then take a spray bottle of sudsy soap and make sure you don't have any leaks. Also turn the tank off when not in use.
  • Posted 19 Sep 2014 05:08
  • Reply by mrfixit
  • New York, United States
Is it easy to replace? Haven't seen any videos.

Also where is a good place to get the part? I was told to always replace the filter at the same time.
  • Posted 19 Sep 2014 04:36
  • Reply by Johnnycoldcuts
  • Pennsylvania, United States
Sounds correct to me. That's what happens most every time a regulator fails.
  • Posted 19 Sep 2014 04:34
  • Reply by mrfixit
  • New York, United States

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Nagano NUZ090D
Yokohama, Japan
Used - Sale
Hangcha 80XENS
Flesherton, Ontario, Canada
New - Sale
Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Movers & Shakers
Linda Häkkilä Linda Häkkilä
vice president, Investor Relations, Konecranes
vice president operations, Elokon Group
President, EP Equipment Europe
Senior vice president human resources, Kalmar
Upcoming industry events …
May 09-11, 2025 - Bangalore, India
October 21-23, 2025 - Panama City, Panama
July 15-17, 2025 - Hong Kong, Hong Kong
Upcoming in the editorial calendar
Upcoming industry events …
May 09-11, 2025 - Bangalore, India
October 21-23, 2025 - Panama City, Panama
July 15-17, 2025 - Hong Kong, Hong Kong
Latest job alerts …
Louisville, KY, United States
Louisville, KY, United States
Dubuque, IA, United States
Movers & Shakers
Linda Häkkilä Linda Häkkilä
vice president, Investor Relations, Konecranes
vice president operations, Elokon Group
President, EP Equipment Europe
Senior vice president human resources, Kalmar