Showing items 1 - 4 of 4 results.
ah so you did get a 6t. that was kind of important.
The team is now ready!
exchange current sensors
traction to lift
and I showed codes 6R, 6S, 6T
and did not work LIFT or TRACTION.
The problem was solved by changing the current sensor
Part No. 223-000-137/001.
THANKS!
dss350 has that long vehicle manager, gray or black.
the current sensors are swapable but if the traction was bad and put in the lift place you should have code 6t not 2b so i don't think your current transducers are the problem, you may have a 2b code now from something being put together wrong or power cable routed through the sensor the wrong way.
have you tested the transistor modules inside the vehicle manager? tm3 and 4 are going to be worth looking at after getting 2b to go away. good luck
I think you are referring to the power amps? You swapped amps? Or Prox? If problem followed then you know it needs that amp or prox
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.