Clark WP40:
No up or down

I cleand it then not working was fine befor moves f b fine
  • Posted 24 Jul 2014 15:26
  • Modified 24 Jul 2014 15:28 by poster
  • Discussion started by Mpare1
  • Massachusetts, United States
M pare1
Showing items 1 - 8 of 8 results.
yeah there is always that pesky wire harness in the handle, always seems to break wires at the base where it pivots. Don't know why i didn't think of mentioning that but had to start somewhere.
Glad you figured it out. :o)
  • Posted 28 Jul 2014 22:44
  • Reply by swoop223
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com
Thank you all I would have never got it if not for the tips! It was the red supply wire up to the handle was broken at the hing with one other took my time sneaked a new wire not that hard just take your time thank you m pare
  • Posted 28 Jul 2014 01:41
  • Reply by Mpare1
  • Massachusetts, United States
this is a pallet jack. there is a switch at the top of the lift linkage stroke to shut off the pump power when all the way up. the arm on the switch can get bent, and the switch itself can go bad. locate that switch under the cover, and check by jumpering the wires. do not leave the wires jumpered as you will damage other components. Or better yet, get a crown tech to check it out, as you can get hurt trying to work a jumper wire while the truck may lift.
  • Posted 26 Jul 2014 06:17
  • Modified 26 Jul 2014 06:19 by poster
  • Reply by edward_t
  • South Carolina, United States
"it's not rocket surgery"
Do you hear any clicking when you press the up button? Could be a faulty solenoid.
also check and make sure it is not in lift lockout due to low battery.
  • Posted 26 Jul 2014 05:56
  • Reply by swoop223
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com
How did you clean?
  • Posted 26 Jul 2014 00:22
  • Reply by bbforks
  • Pennsylvania, United States
bbforks (at) Hotmail (dot) com
Customers love technology- until they have to pay to fix it!
Look for a discconet wire in the solenoids valves
  • Posted 24 Jul 2014 16:01
  • Reply by mike_raymond
  • baja california, Mexico
Moves frount and back all selonods and pump looks very new.just no up and down?
  • Posted 24 Jul 2014 15:48
  • Reply by Mpare1
  • Massachusetts, United States
M pare1
Help please
  • Posted 24 Jul 2014 15:38
  • Reply by Mpare1
  • Massachusetts, United States
M pare1

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Machinery-onQ Listings
Toyota 5FGL25
  • Toyota5FGL25
  • 1991 | Used - Sale
  • Japan
Toyota 5FG15
  • Toyota5FG15
  • 1987 | Used - Sale
  • Japan
Cat 308DCR2
  • Cat308DCR2
  • 2012 | Used - Sale
  • Japan
Nissan P1F2A20D
  • NissanP1F2A20D
  • 2012 | Used - Sale
  • Japan
Nissan L01A15W
  • NissanL01A15W
  • 2007 | Used - Sale
  • Japan
Airman PDSF530S
  • AirmanPDSF530S
  • 2006 | Used - Sale
  • Japan
Toyota 5FGL15
  • Toyota5FGL15
  • 1989 | Used - Sale
  • Japan
Nissan NH01A18
  • NissanNH01A18
  • 1989 | Used - Sale
  • Japan
Komatsu PC10-7
  • KomatsuPC10-7
  • 1991 | Used - Sale
  • Japan
Nissan PL02A25W
  • NissanPL02A25W
  • 2007 | Used - Sale
  • Japan
Featured Business
Veshai Handling Equipment Co. Ltd.
Manufacturer of extensive line of electric lifting equipments.
Machinery-onQ Listings
Airman PDSF530S
  • AirmanPDSF530S
  • 2006 | Used - Sale
  • Japan
Toyota 5FG15
  • Toyota5FG15
  • 1987 | Used - Sale
  • Japan
Cat 308DCR2
  • Cat308DCR2
  • 2012 | Used - Sale
  • Japan
Toyota 5FGL25
  • Toyota5FGL25
  • 1991 | Used - Sale
  • Japan
Nissan PL02A25W
  • NissanPL02A25W
  • 2007 | Used - Sale
  • Japan
Nissan NH01A18
  • NissanNH01A18
  • 1989 | Used - Sale
  • Japan
Toyota 5FGL15
  • Toyota5FGL15
  • 1989 | Used - Sale
  • Japan
Nissan P1F2A20D
  • NissanP1F2A20D
  • 2012 | Used - Sale
  • Japan
Komatsu PC10-7
  • KomatsuPC10-7
  • 1991 | Used - Sale
  • Japan
Nissan L01A15W
  • NissanL01A15W
  • 2007 | Used - Sale
  • Japan