I am working on this Toyota 8FGU32, and it is displaying a E67-1 error code, I checked the mast sensor, and harness, they appear to working correctly, I disconnected the battery, cleaned up the terminals and posts, assuming this would be enough time to clear any codes, but the code is still present on the display, I tried the 5 cycles of the accelerator pedal, but still no luck.
There does not appear to be any ill effect to the code, other than being a nuisance code scrolling across the display.
Any thoughts, tips or suggestions?
Showing items 1 - 6 of 6 results.
how did you solve this issue i have a unit having the same issue.
Yep, that is a faulty cpu board.
You can sent it to TVH if possible, they can fix it for a good price ore sent you a used one.
hi john,i am suspecting to have a faulty cpu because i got the cpu on the forklift which is giving me errors then i plugged the same cpu on the forklift which is working but the same error(E67-1) still popped up,can it be a faulty cpu?
67-1 is the lift height sensor, check the cable conection between mast and body, you can disconnect the sensor and see if any other error pops up. There are 3 wires. (normaly open and normaly closed)
You can,t clear the errorlog, when error is fixted the display will not show the error.
67-1 is the lift height sensor, check the cable conection between mast and body, you can disconnect the sensor and see if any other error pops up.
To clear the errorlog, just disconnect the - side battery for a minute.
i am also experiencing E67-1 on my toyota forklift FBEU15,how did you manage to clear out the error?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.