Jungheinrich EKX-515 Controller problem. - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Jungheinrich EKX-515 Controller problem.

Hi!
It was power problem. The 24V was not at all at one channel. I fixed it (driverIC).
Now, when it moves the fork, the power goes down (LEDs faded), and E0645,E2703,2304 are present. HELP!

Posted 9 Feb 2014 15:14
Modified 9 Feb 2014 15:21 by poster
Discussion started by alexander_b
Moscow, Russia

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

The.problem was.the version of version softwae try to update the controler version like forklift

Posted 17 Jun 2019 08:05
Modified 17 Jun 2019 08:07 by poster
Reply by imad_b
oulfa, Morocco

Post a Reply Report this post

Try to check the mast cable.

Posted 20 Sep 2016 17:45
Reply by scooby
south cotabato, Philippines

Post a Reply Report this post

Hello Alex, i hope that you are fine, now i have a similar problem that you, the machine is dead, and the 24v are not available. I appreciate if you can explain me more detail what component you changed. Thanks

Posted 5 Apr 2016 00:39
Reply by Yangomez
Bogota, Colombia

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.