Showing items 1 - 7 of 7 results.
and if no one is in the seat, [naturally] the truck will not drive, check the seat switch and related wires.
The light flashing on the dash is for the operator presence sensor in the seat. It indicates no one in seat.
the f34 code is for a wire down low on the trans case, just about the bottom wire on the truck, gets pulled off if you have a lot of paper or plastic that you run over.
Had machine running now will not move forward or reverse. connection and power ok to for/rev solenoid on trans. when it is put in gear the neutral light in dash flashes.
vehicle speed sensor malfunction,
check the wire on the trans case for good connection.
THE CODE DISPLAYED IS F-34
Does it show any codes on dash display??
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.